Water and Wastewater.com Help Forums - HOW to increase MLSS concentration

(Moderator: Joseph Taylor)

‹ Previous Topic | Next Topic ›

Pages: 1

Send Topic

HOW to increase MLSS concentration (Read 131 times)

Karan

YaBB Newbies

Offline

I love Water and
Wastewater.com

Posts: 22

Company or Organization: University Malaysia Perlis

HOW to increase MLSS concentration
May 10^th, 2012, 8:07pm

Sir,
Morning.

Me and my supervisor finding for optimum polymer usage for Dewatering seem our BOD loading is low, we by pass Thickening process. Our WAS pump working intermittent to archive 1-2% ( 1000- 2000 mg/L). Now we could only collect sample for 10000 mg/L from Thickening Tank. Now my problem is, how to increase my MLSS from 10000 to 40000 mg/L to conduct my lab test to determine the optimum polymer.

Please advise.

IP Logged

Tom Keenan - nesa God Member Offline Environmental Consultant - contact info@nesa.ie Posts: 2103 Gender: Company or Organization: nesa environmental consultants	Re: HOW to increase MLSS concentration Reply #1 - May 11^th, 2012, 5:39pm Hi Karan, I find your question a little confusing, can you clarify, please? If you are trying to optimise polymer dosage, then you will have to do some bench or jar tests.
Back to top	tomkeenan@nesa.ie Environmental Consultant www.nesa.ie IP Logged

Pages: 1

Send Topic

‹ Previous Topic | Next Topic ›