Home
W&WW Blog Case Histories Books Shop Amazon Member Survey Advertise ?
Buyer's Guide News Help Forum Ask Tom! Jobs Videos Online Training

Water and Wastewater.com Help Forums

Click here now

Search

Welcome, Guest. Please Login or Register
May 19th, 2013, 6:49pm
Top 10 Members
Runyan Sobisch Keenan Seghers Santa Cruz Gillen Kendall Orlebeke Ayrus Kersey
  HomeHelpSearchLoginRegister  
Coag/floc of detergents? (Read 183 times)
maer
YaBB Newbies
*
Offline

I love Water and
Wastewater.com

Posts: 1

Gender: male

Company or Organization: NEMS Technologies Sdn Bhd
Coag/floc of detergents?
May 16th, 2012, 10:48pm
 
Hi, I'm new here.

I would like to request for help/advice by the experts here on treating this water from a detergent production company.

The company produces detergents with about 13% of surfactants, which are mostly:
- SLS (sodium laureth sulfate)
- LAS / LABS (Linear alkyl benzene sulfonate)
- some sort of chlorate ???

I believe that the 3rd surfactant they use is for allowing indoor drying of the washed clothes (without having any malodor).

Based on the BOD/COD ratio obtained of the sample, the ratio is less than 0.2, which to m, it means that chemical process (coag/floc) is the most suitable method.

We had tried various combinations of alum, caustic, FeCl3, organo floc, and anionic floc, and had succeeded to a certain extent.

Shocked however, if someone here can suggest a more suitable treatment method using chemicals, please do kindly advise, along with the conditions, eg pH, time needed, dosage etc.

Thank you very much
Back to top
 
 
  IP Logged
DrHenry
God Member
*****
Offline

Ride, boldly ride,
The shade replied...

Posts: 788
Raleigh, NC

Company or Organization: CESTAB (see bio)
Re: Coag/floc of detergents?
Reply #1 - May 18th, 2012, 10:14am
 
You seem to have covered the lot, but two I don't see are ferrous sulfate and cationic polymers.  Yes, cationic may not make sense, but depending on the pH, it may work.  Also, for the ones you tried, make sure you are doing the full range of pH (5-9) not just suggested values.  For the inorganics, make sure you are taking them up to ridiculous ranges of 1000-2000 mg/L.
Back to top
 
 
WWW   IP Logged
Jeff Naumann
God Member
*****
Offline

I love Water and
Wastewater.com

Posts: 1133
Torrance, California
Gender: male

Company or Organization: Jeff Naumann & Associates
Re: Coag/floc of detergents?
Reply #2 - May 18th, 2012, 2:28pm
 
Back to top
 
 
WWW   IP Logged
sobisch
God Member
*****
Offline



Posts: 1777

Gender: male

Company or Organization: L.U.M. GmbH
Re: Coag/floc of detergents?
Reply #3 - May 21st, 2012, 1:57am
 
Dear Maer,

the first two surfactants you mentioned have good biodegradability. The mentioned 'chlorate' then seems to be the problem.
Adaptation of the biomass might be a solution. The oxidizing third compound may loose its activity during storage. A buffer tank might reduce the problems for biodegradation. Would it be possible to treat the third compound separately?

Kind regards
T. Sobisch
Back to top
 
 

T. Sobisch
for@appliedcolloidssurfactants.info
http://AppliedColloidsSurfactants.blogspot.com
http://www.AppliedColloidsSurfactants.info
http://www.lum-gmbh.com
WWW   IP Logged