Well boiler blow-down water is very hot/warm, we used to use it to pre-heat other water in the plant. In some spots we used boiler blow-down for washing down due to its high pH and heat content, just have to use a proper hose and PPE.

You could run both flows through evaporators and reuse in your cooling towers.  

~Eric

The cooling tower shell is made of alum-zink galvanized plate. The machining by digitally controlled equipments requires no welding. Main function of this is to discharge the saturated hot air inside the cooling tower. It is made of air inlet louvers, fan, fan cylinder and protection Cooling Tower grid etc. This range of cooling towers is ideally suited for indoor installation and applications which require extensive air inlet and outlet ductwork. Industry leading manufacturer of right angle gear drives engineered and constructed exclusively for cooling tower. Now you can shop online for your Cooling Tower Drive Shaft at the ATS Cooling Tower Parts store. Whether you have a counterflow or crossflow cooling tower, or mechanical draft or natural draft cooling tower. You are interested in having us remove your existing cooling tower drive shaft and install a new one, please visit our Cooling Tower Repair page. The cooling tower incorporated in all the closed circuit towers is Evapco’s with unique advanced features which provides the maximum heat transfer characteristics. Amarillo Gear Machines are self-contained frost protection systems that are designed to work in virtually any situation where frost endangers crops. Composite center spacer member weight is a mere fraction of the weight of a steel cooling tower drive shaft center member.