Description:  In this fifth and final lecture on pneumatic conveying, Jack Hilbert of Pneumatic Conveying Consultants discusses the troubleshooting and performance optimization of major components of the pneumatic conveying system, the Conveying Line and the Product Receivers.

The types of equipment are presented along with their functionality and performance characteristics. Commonly found operational problems are presented along with their early detection symptoms along with recommended solutions.

A specific example showing how relatively simple and inexpensive conveying line modifications can correct operational problems and provide opportunities for incremental system capacity growth.

Lecture includes downloadable class notes and a self administered quiz with answer sheet.  The seven-day subscription allows you to watch and review this video class as many times as you need.

	Lecture 1:  Pneumatic Conveying Overview The basic pneumatic conveying system is described as well as types and modes of pneumatic conveying systems along with the advantages, disadvantages... (click for more)
	Lecture 2:  Component Selection – Gas movers and product receivers The types of equipment are presented along with their functionality and performance characteristics. Optional features and accessories which can... (click for more)
	Lecture 3:  Component Selection – Line chargers and the conveying line The primary options for line chargers and the conveying line along with the more common auxiliary components are discussed in length... (click for more)
	Lecture 4:  Troubleshooting and Optimization – Gas movers and line chargers Optimization of major components of the pneumatic conveying system, the gas mover and the line charger are discussed in length.... (click for more)
	Lecture 5:  Troubleshooting and Optimization – Conveying line and receivers Not only are operational problems with the individual components discussed, but also the impact of those individual components’ affects on the entire conveying... (click for more)

Watch the Pneumatic Conveying Series and Save!		Lectures: 1 through 5 Subscription: 21 days Price:  $158 $95 (US) Secure checkout with:
	Now you can save 20% by purchasing all five of the Pneumatic Conveying Lecture Series, together. Plus, you will have up to 21 days to complete the lecture series! Now everyone in your office can take Jack HIlbert's Lecture Series!

Jack Hilbert of Pneumatic Conveying Consultants LLC offers technical services in the design and optimization of new systems, start-up and troubleshooting of existing systems, sizing and selection software for pneumatic conveying systems and the ancillary components typically used in dilute-phase, two-phase and dense-phase pneumatic conveying systems.

Jack received his BS in Mechanical Engineering and MS Engineering Science degree from Penn State University.  Since 1980 he has been a registered Professional Engineer in state of Pennsylvania.

Formerly with Fuller Bulk Handling Corporation, Jack has over 32 years of professional experience in bulk material handling systems and environmental products.  He has authored numerous technical papers on subjects relating to pneumatic conveying and bulk material handling systems.

Please feel free to contact our author at:

Mr. Jack D. Hilbert, PE
Pneumatic Conveying Consultants LLC
5836 Ridge Rd.
Schnecksville, PA  18078
Telephone:  610-657-5286
Fax:  610-683-7592
Email:  jack.hilbert@yahoo.com
Web site:  http://www.powderandbulk.com/pcc/

  Does your company or consultancy offer lectures for the bulk materials handling and processing
  professional?  Contact us about including your lecture series in our new Online Training Center.
  Email us at:  jtaylor@powderandbulk.com with more information about your lectures and/or classes.