|
 |
Livingston, NJ -- Taskmaster TM8500 series inline grinders quickly and effectively reduce sewage and sludge solids to fine particles directly in pipeline systems. Along with innovative "Cutter Cartridge Technology", these grinders now feature a convenient “drop-in” housing.
This unique design allows for fast and easy removal of the cutter mechanism for periodic maintenance without sacrificing unit strength. These units have the same proven, high quality mechanical seal design found in Taskmaster channel grinders.
Only with Taskmaster grinders, do you get one-piece Cutter Cartridges that replace banks of weak individual cutters and spacers. The result is a durable grinder with a remarkable resistance to cutter and spacer cracking. This design dramatically increases unit strength, reduces maintenance time and totally eliminates the need for cutter stack re-tightening.
The Taskmaster also features a unique high flow side rail design. As a result this unit delivers superior flow and headloss characteristics.
The TM8500 has two counter rotating stacks that intermesh at close clearance to shear and shred solids into fine bits. One shaft feeds solids to the center of the unit while the other shreds them. The output achieved is easily processed by downstream equipment such as pumps, centrifuges, and belt filter presses.
The Taskmaster can be successfully installed in sewage treatment plants, sludge lines, pumping stations, roadside or runway sanitary facilities, institutional waste, or small solid waste applications. It is supplied for open channel or in-line applications. The units are available for 4" through 24" pipe sizes.
For more information contact:
Franklin Miller Inc.
60 Okner Pkwy
Livingston, NJ 07039
Telephone: 800-932-0599 or 973-535-9200
Fax: 973-535-6269
Web site: http://www.franklinmiller.com/
© Copyright 1998 - 2008 Water and Wastewater.com
Top of Page
