|
 |
Marlow, UK -- ELGA Process Water, a Veolia Water Solutions & Technologies company, has introduced a new compact water treatment system that meets the needs of a wide range of industries.
The IonPRO LX Mk 2 produces up to 1000 liters per hour of high purity deionized water for use in the production of pharmaceuticals, cosmetics, medical devices, contact lenses, microelectronics components and other demanding applications. The treated water has conductivity typically less than 0.2mS/cm, organics less than 500ppb and total bacteria count less than 100cfu/ml, which meets the requirements for pharmaceutical Purified Water and ASTM Type E4 for microelectronics.
With the smallest footprint in its class, the IonPRO LX Mk 2 contains a fully integrated water treatment train of duplex softeners, carbon block or granular carbon cartridge pre filter, a tank and pump, low pressure reverse osmosis modules and 10 or 18 cell pair CEDI stacks. The sanitization sequence is fully automatic and the cleaning in place procedure is easily carried out by following the prompts on the touch panel display. Both procedures utilize the integral tank for chemical mixing and recirculation. The complete assembly is mounted on a wheeled base for ease of access during maintenance.
There are five models in the IonPRO LX Mk 2 range covering flow rates from 500 – 1000 l/h and all models are factory tested and provided with a full validation pack covering installation qualification (IQ) and operational qualification (OQ).
The all new microprocessor controller which features an intuitive HMI — set points are user configurable, protected by I-button security. The controller can be provided with Ethernet or RS232 communications protocols as an optional extra.
Source: http://www.elgaprocesswater.co.uk/
© Copyright 1998 - 2012 Water and Wastewater.com
Top of Page
