Category: Blog

Badger Meter vs Emerson Gates Equipment: Comparison & Best Fit Introduction A scope correction belongs at the very top of this comparison, because the pairing as written does not describe a real procurement decision. Neither Badger Meter nor Emerson manufactures water control gates. Slide gates, sluice gates, weir gates, stop logs and the associated frames […]

UV Water Disinfection: A Proven Method for Safe Drinking Water Ultraviolet water disinfection uses germicidal UV-C to inactivate bacteria, viruses and protozoa without introducing chemical residuals. This article gives municipal decision makers, plant designers and operators the technical guidance they need: dose metrics and log reductions, reactor hydraulics and transmittance limits, lamp and sensor choices, […]

Thermo Fisher vs Siemens Flocculation Equipment: Comparison & Best Fit Introduction Chemical coagulation and flocculation consume a substantial share of the annual consumables budget at most surface water treatment plants — frequently the single largest line item. Despite those stakes, the specification of control and monitoring equipment for the process often relies on outdated paradigms […]

Badger Meter vs YSI Digestion Equipment: Comparison & Best Fit Introduction Sludge digestion remains one of the most volatile and critical unit processes in wastewater treatment. A sour anaerobic digester or a foaming aerobic basin costs a utility real money in chemical buffering, hauled waste fees and regulatory exposure. The reliability of the eyes and […]

Reverse Osmosis in Water Treatment: How It Works and Why It Matters In an age where clean and safe drinking water is more crucial than ever, reverse osmosis water treatment stands out as a powerful solution for ensuring water quality. This advanced filtration technology effectively removes contaminants, making it a popular choice for both home […]

Siemens vs YSI CSO/Storm Equipment: Comparison & Best Fit Introduction Accurate monitoring of combined sewer overflows and stormwater systems under regulatory consent decrees is one of the harder instrumentation problems municipal engineers face. Equipment must survive rag-prone environments, operate reliably through rapid hydraulic changes, and produce data accurate enough to satisfy environmental agencies. A frequent […]

ABB vs VEGA CSO/Storm Equipment: Comparison & Best Fit Introduction Combined sewer overflow and stormwater monitoring is one of the most hostile operating environments in the water sector. Unlike controlled treatment plant headworks, CSO outfalls and remote retention basins face rapid hydraulic surges, condensing humidity, heavy ragging and potential submersion. A single failed sensor during […]

Endress+Hauser vs Thermo Fisher Conventional Dry Pit Equipment: Comparison & Best Fit Introduction In the municipal water and wastewater sector, the dry pit is a misnomer that regularly leads to expensive equipment failures. Designed to separate mechanical and electrical equipment from the wet well, dry pits and valve vaults are hostile environments — high humidity, […]

Membrane Bioreactor Technology: Advanced Solutions for Wastewater Treatment In an era where sustainable water management is more critical than ever, membrane bioreactor (MBR) technology stands out as a game-changer in wastewater treatment. This innovative approach combines biological treatment processes with advanced membrane filtration, offering superior effluent quality and efficient nutrient removal. In this post, we'll […]

Badger Meter vs Siemens Clarification Equipment: Comparison & Best Fit Introduction The clarifier is the hydraulic control center of the secondary process, but its efficiency depends entirely on the accuracy of the feedback loops controlling it. Mechanical failure is obvious. Sensor drift or misapplication in return activated sludge lines or blanket monitoring goes unnoticed until […]