Category: Secondary Treatment

Rotating Biological Contactors (RBCs) are an efficient means of treating wastewater through a biological process that involves microorganisms affixed to a rotating media. These systems are engineered to remove organic and nitrogenous waste from water by allowing microorganisms to come into contact with waste in the water. An RBC system consists of a series of […]

Secondary clarification is an integral step in the wastewater treatment process, focusing on separating biological floc or sludge from the treated water after the primary treatment and biological processes have taken place. This phase is crucial as it determines the quality and clarity of the effluent, leading to the release of safe water back into […]

Aeration is a critical process in the treatment of wastewater, involving the introduction of air into sewage to allow aerobic bio-degradation of the pollutant components. It is a vital part of most biological wastewater treatment systems; microorganisms in the wastewater need oxygen to break down organic matter into harmless by-products. Oxygen is supplied through aeration, […]

Safe drinking water and effective wastewater treatment are critical for protecting public health and the environment. Chemical technologies play an important role alongside physical and biological treatment methods. This article provides an overview of key chemical processes used, design considerations, and challenges for further improvement. Chemically-enhanced sedimentation (coagulation and flocculation) is used to remove suspended […]

Biological treatment in wastewater management is a process that mimics the natural purification mechanisms found in the environment. It involves using microorganisms, such as bacteria and protozoa, to break down organic matter in sewage or industrial effluents. This method is favored for its efficiency in reducing the load of pollutants and its role in the […]

Secondary treatment in wastewater is a vital process that follows the primary treatment stage to purify wastewater further before it is released into the environment or reused. Primary treatment involves the removal of large solids and sedimentation, which reduces the water’s organic load but does not eliminate dissolved organic matter or pathogens. This is where […]