Tag: Valve specification

INTRODUCTION Handling heavy primary sludge, raw grit, lime slurries, or industrial tailings presents one of the most punishing fluid handling challenges in any treatment facility. In these applications, standard valving rapidly falls victim to severe abrasion, chronic clogging, and debilitating torque spikes. A surprising number of facilities experience premature valve failures—sometimes within months of commissioning—simply […]

INTRODUCTION In municipal water, wastewater, and industrial fluid transport systems, gate valves are the quintessential isolation mechanism. However, a common misconception plagues piping design: the assumption that because gate valves are typically operated either fully open or fully closed, calculating their flow coefficient is unnecessary. This oversight makes Gate Valves Sizing and Selection: Cv one […]

INTRODUCTION In municipal and industrial treatment environments, equipment survivability is dictated heavily by the presence of grit, rags, hydrogen sulfide (H2S), and fats, oils, and grease (FOG). For consulting engineers and utility managers, understanding exactly How to Specify Valves – Construction Service for Wastewater Service (Materials Coatings and Standards) is a critical skill that directly […]

Introduction to Valve Specification in Municipal Infrastructure In municipal water and wastewater infrastructure, valves typically represent less than 5% of the capital expenditure (CAPEX) of a treatment plant or collection system. However, industry reliability data suggests that valve failures, leakage, and actuation issues can account for up to 60% of the unscheduled maintenance operational expenditure […]