Tag: water

Feb 18
Double Disc Pump Wet Well Design and Minimum Submergence to Prevent Vortexing

Introduction One of the most persistent misconceptions in municipal wastewater engineering is that positive displacement (PD) pumps are immune to the hydraulic sensitivities that plague centrifugal systems. While it is true that double disc pumps (DDP) are robust, self-priming, and capable of handling high solids, they remain subject to the fundamental laws of fluid mechanics. […]

Feb 18
Horizontal End Suction Pumps VFD Setup: Preventing Overheating

INTRODUCTION A frequent failure mode in municipal water and industrial wastewater applications is not the catastrophic burst of a casing, but the silent, cumulative degradation of insulation and mechanical seals due to thermal stress. Engineers often prescribe Variable Frequency Drives (VFDs) to improve energy efficiency, assuming that slowing a pump down inherently reduces stress on […]

Feb 18
Submersible Materials Selection: Cast Iron vs Stainless vs Duplex in Wastewater

Introduction to Submersible Pump Metallurgy One of the most persistent and costly challenges in modern wastewater management is the premature degradation of submersible pumping equipment due to shifting influent chemistry. As water conservation efforts reduce flow rates, wastewater becomes more concentrated. Simultaneously, longer retention times in force mains and collection basins accelerate septicization, leading to […]

Feb 17
Non-Clog Wastewater Pumps Wet Well Design and Minimum Submergence to Prevent Vortexing

Introduction One of the most persistent and costly failures in municipal wastewater collection systems is not the mechanical failure of the pump itself, but the failure of the intake hydraulics. Engineers frequently specify high-efficiency, robust pumping equipment, only to place it into a geometry that guarantees reduced lifespan. A significant percentage of premature bearing failures, […]

Feb 17
Selection Guide: How to Specify Metering Pumps for Municipal Lift Stations

Introduction Municipal engineers frequently underestimate the complexity of chemical injection at remote lift stations. While the primary sewage pumps receive the bulk of the design attention, the auxiliary chemical feed systems are often the critical defense against the wastewater industry’s most pervasive enemies: hydrogen sulfide ($H_2S$) corrosion, noxious odors, and Fat, Oil, and Grease (FOG) […]

Feb 16
Peristaltic Troubleshooting: Symptoms

Introduction Peristaltic pumps (often referred to as hose pumps or tube pumps) are frequently selected for their ability to handle aggressive chemicals, viscous sludge, and shear-sensitive fluids in water and wastewater treatment. However, despite their mechanically simple design—typically involving a rotor compressing a hose—they present a unique set of operational challenges. A surprising industry statistic […]

Feb 16
Double Disc Pump VFD Setup: Preventing Overheating

Introduction In the realm of municipal wastewater treatment and industrial slurry handling, the double disc pump has carved out a niche as a robust solution for difficult fluids containing solids, rags, and grit. However, a surprising number of these installations fail prematurely, not due to mechanical inadequacy, but because of improper Variable Frequency Drive (VFD) […]

Feb 14
Activated Carbon Filtration: Removing Contaminants from Water

Activated Carbon Filtration: Removing Contaminants from Water Article Overview Article Type: Informational Primary Goal: Provide municipal engineers, wastewater treatment operators, plant designers, and equipment manufacturers with a technical, implementation-focused guide to activated carbon filtration covering mechanisms, contaminant scope, design calculations, operational practices, monitoring, regeneration and disposal options, vendor selection, and real-world performance data so they […]

Feb 14
Selection Guide: How to Specify Peristaltic for Wastewater Treatment Plants

Introduction In the complex hydraulics of a modern wastewater treatment plant (WWTP), the peristaltic pump—often referred to as a hose pump or tube pump—occupies a critical niche that centrifugal technologies cannot fill. While engineers are intimately familiar with pump curves for water transfer, the specification of positive displacement equipment for abrasive sludge or off-gassing chemicals […]

Feb 13
Ion Exchange Water Softening: How to Remove Hard Water Minerals

Ion Exchange Water Softening: How to Remove Hard Water Minerals Article Overview Article Type: How-To Guide Primary Goal: Give municipal and industrial wastewater professionals a detailed, engineer-grade guide to design, specify, operate, and troubleshoot ion exchange water softening systems that remove calcium and magnesium, including resin selection, regeneration chemistry, brine management, monitoring and a worked […]