Tag: water

Introduction In the realm of municipal and industrial wastewater treatment, sludge management typically accounts for 30% to 50% of a plant’s total operating costs. The efficacy of the dewatering process is the linchpin of this economic equation. While centrifuges and screw presses have gained market share in recent decades, the belt filter press (BFP) remains […]

Introduction One of the most frequent causes of pipeline failure in municipal water and wastewater infrastructure is not structural weakness of the pipe itself, but rather the mismanagement of entrained air and vacuum conditions. A startling number of force main bursts and transmission line collapses can be traced back to improper sizing, placement, or selection […]

INTRODUCTION In the design of high-head municipal pump stations and critical transmission mains, the selection of isolation and pump control valves is a decision that dictates facility reliability for decades. Engineers frequently default to standard butterfly or gate valves to save on capital expenditure, only to face catastrophic surge events, premature seat failure, or excessive […]

Aqua Aerobic Systems: Optimizing Biological Treatment Processes Mechanisms of Aqua Aerobic Systems Aqua aerobic systems are the unsung heroes of wastewater treatment, using a clever blend of biology and engineering to tackle the messiest of municipal challenges. Did you know that these systems can reduce organic matter by up to 90%? That's not just impressive; […]

Introduction In the hydraulic architecture of municipal and industrial water and wastewater systems, the plug valve occupies a critical niche, balancing the requirements of reliable isolation with the capability for throttling flow control. Unlike gate valves, which are strictly for on/off service, or butterfly valves, which may struggle with heavy solids, the plug valve—specifically the […]

Introduction In the municipal water and wastewater sector, the failure of a critical valve actuator is rarely a minor inconvenience; it is often a precursor to permit violations, process upsets, or catastrophic flooding. For decades, design engineers and plant superintendents have faced a polarized choice when specifying electric actuation: adhere to traditional domestic manufacturing philosophies […]

Introduction For municipal engineers and utility directors, the residential grinder pump represents a unique intersection of homeowner interface, hydraulic necessity, and maintenance liability. In areas where gravity sewer is cost-prohibitive due to high water tables, bedrock, or undulating terrain, Low Pressure Sewer (LPS) systems utilizing grinder pumps are often the only viable sanitary solution. However, […]

Introduction to VAG Flow Control Technologies One of the most persistent challenges in municipal and industrial water infrastructure is the management of high-energy water streams without inducing catastrophic mechanical failure. Engineers frequently underestimate the destructive power of cavitation and water hammer, leading to premature valve degradation and pipeline ruptures. Within the global water sector, VAG […]

1. Introduction In the hierarchy of wastewater treatment unit processes, grit removal serves as the critical line of defense for downstream mechanical equipment and biological processes. Located at the headworks of a facility—typically immediately following coarse screening and raw sewage pumping—grit removal systems are tasked with the physical separation of inorganic solids from the waste […]

Introduction In the hierarchy of water and wastewater treatment plant assets, the electric valve actuator is often treated as a commodity—a “black box” expected to turn a valve stem upon command. However, incorrect specification or selection between major OEMs can lead to catastrophic process failures, unmanageable maintenance burdens, and integration nightmares. For decades, two manufacturers […]