Tag: distribution

Introduction In municipal water distribution and wastewater treatment, the isolation valve is the most critical yet frequently overlooked asset. Industry data suggests that up to 20% of installed gate valves in North America are inoperable or pass water when isolation is attempted during an emergency. For the consulting engineer or utility director, the choice of […]

1. INTRODUCTION The sound of a check valve slamming shut—resembling a sledgehammer striking the pipe—is more than a nuisance; it is an audible indicator of kinetic energy rapidly converting to pressure energy, potentially exceeding the structural limits of the piping system. For municipal and industrial engineers, the selection of check valves is the primary line […]

Introduction In the complex infrastructure of municipal and industrial water and wastewater systems, the gate valve remains the ubiquitous workhorse for isolation. Despite the emergence of newer valve technologies, the gate valve—specifically the resilient wedge and double disc varieties—continues to dominate specifications for underground distribution networks, pump station isolation, and treatment plant segregation. For the […]

Introduction In municipal water and wastewater treatment infrastructure, valves act as the critical control points for hydraulic stability, process isolation, and flow regulation. A surprising statistic in utility asset management reveals that while valves often constitute less than 10% of a plant’s capital cost, they account for upwards of 25% of the maintenance budget over […]

Introduction The substitution request is a familiar scenario for municipal consulting engineers and plant superintendents: a specification calls for a domestic standard, yet a contractor submits an international alternative to reduce capital costs. This creates a critical decision point regarding Crispin Valve vs DHC International for Butterfly Valves: Pros/Cons & Best-Fit Applications. While approximately 70% […]

Introduction In municipal and industrial water and wastewater systems, the control valve serves as the primary mechanism for hydraulic regulation. Unlike isolation valves, which are designed for infrequent open/close cycles, control valves must dynamically modulate flow and pressure to maintain system stability, protect aging infrastructure, and ensure consistent delivery of potable water or efficient processing […]

Introduction In the municipal water and wastewater sector, the butterfly valve is the workhorse of isolation and flow control for large-diameter piping. However, a pervasive issue continues to plague capital improvement projects: the “specification inertia” where engineers copy-paste valve specifications without re-evaluating the current manufacturing landscape. This often leads to suboptimal lifecycle performance, particularly regarding […]

Introduction In municipal and industrial water and wastewater systems, the check valve serves a critical, albeit often understated, function: the prevention of reverse flow. While the fundamental concept—allowing flow in one direction while blocking it in the other—appears simple, the engineering reality is complex. Check valves are the primary defense against pump reversal, which can […]

Introduction In municipal and industrial fluid handling, the “miscellaneous” valve category often contains the most critical components for system stability and surge protection. While gate and butterfly valves handle standard isolation duties, specialized equipment—such as air release valves (ARV), check valves, pilot-operated control valves, and pinch valves—dictates the hydraulic integrity of the network. Engineers frequently […]

Introduction In the hierarchy of treatment plant equipment, flow control gates are often treated as static commodities rather than dynamic machinery. This is a critical error. While a pump failure may stop flow, a gate failure can result in catastrophic flooding, bypass events, regulatory fines, and process upsets that compromise the entire plant. A surprising […]