Tag: integrated
FACILITY BASIC INFORMATION Plant Name: Regional Water Recycling Plant No. 1 (RP-1) Location: 2602 Concours Street, Ontario, San Bernardino County, CA 91764 Operating Authority: Inland Empire Utilities Agency (IEUA) Design Capacity: 44.0 MGD (Liquid), 70 MGD equivalent (Solids) Current Average Flow: ~26-28 MGD Population Served: Approx. 875,000 (Regional System Total) Service Area: Ontario, Upland, Montclair, […]
Introduction One of the most persistent challenges in water and wastewater engineering is the interface between disparate systems. Whether connecting a new ductile iron pipeline to an existing asbestos-cement main, retrofitting a modern submersible pump onto a 30-year-old discharge elbow, or automating manual valves with electric actuators, the success of the project often hinges on […]
Introduction In the complex infrastructure of municipal water and wastewater treatment, the actuation of valves is the muscle behind process control. While electric actuation has gained ground due to advances in network connectivity, pneumatic valve actuators remain a cornerstone of industry reliability, particularly in applications requiring rapid response, high duty cycles, and fail-safe operation. For […]
Introduction Aeration systems represent the single largest energy consumer in biological wastewater treatment, typically accounting for 50% to 75% of a facility’s total electrical demand. For decades, the industry relied on robust but inefficient positive displacement (PD) lobe blowers or uncontrolled multistage centrifugal systems. However, the modern regulatory environment, characterized by strict nutrient limits and […]
1. INTRODUCTION In municipal and industrial water and wastewater treatment facilities, the containment of process basins, channels, and reservoirs is a critical engineering discipline. While historically treated as secondary accessories, cover systems and associated walkways have evolved into essential components for odor control, process stability, safety compliance, and algae mitigation. The shift from heavy concrete […]
Introduction In municipal water and wastewater treatment, valve selection is rarely the most glamorous part of the design process, yet it accounts for a disproportionate amount of maintenance hours and operational frustration. A surprising industry statistic suggests that while valves represent approximately 5% of a plant’s capital cost, they can account for up to 60% […]
Introduction In the hydraulic architecture of municipal and industrial water systems, strainers function as the primary defensive barrier for critical downstream assets. While often overshadowed by dynamic components such as pumps and control valves, the strainer is the sentinel that prevents catastrophic failure caused by entrained solids, scale, biofilm, and debris. For consulting engineers, plant […]
Introduction One of the most persistent challenges in municipal water and wastewater design is the “interface gap”—the point where mechanical flow control meets electrical automation. When a critical isolation valve fails to close during a storm event, or a modulating control valve oscillates wildly, creating damaging water hammer, the root cause often lies in a […]
Introduction In the high-stakes environment of municipal water transmission and large-scale wastewater pumping, the cone valve remains the premier choice for pump control and isolation service. Engineers frequently encounter a complex intersection of mechanical hydraulics and automation controls when specifying these massive assets. A critical point of confusion—and decision—often arises around the interface between the […]
Introduction Ultraviolet (UV) disinfection has transitioned from an “alternative” technology to the industry standard for pathogen inactivation in municipal water and wastewater treatment. However, a critical disconnect remains in the engineering community: the assumption that UV systems are static, “plug-and-play” appliances. In reality, an improperly specified UV system can become the plant’s largest energy consumer […]