Tag: wastewater treatment
Introduction For municipal and industrial engineers, few instruments cause as much operational frustration as the humble pH/ORP analyzer. Despite being fundamental to process control—dictating coagulation efficiency, biological health, and disinfection compliance—these electrochemical sensors are notorious for drift, fouling, and frequent replacement requirements. In many wastewater treatment plants (WWTPs), it is not uncommon to find up […]
Introduction In the transition from traditional cast iron sluice gates to modern fabricated stainless steel and aluminum slide gates, municipal engineers often find themselves evaluating two dominant North American manufacturers. The analysis of Golden Harvest vs Whipps – C for Gates: Pros/Cons & Best-Fit Applications is a critical exercise for any design engineer or utility […]
Introduction In municipal and industrial water treatment, flow measurement is arguably the single most critical variable for process control, yet it remains a primary source of operational inefficiency. It is estimated that flow measurement errors contribute significantly to the 20-30% of Non-Revenue Water (NRW) losses seen in many aging distribution systems. Furthermore, in wastewater treatment, […]
Introduction One of the most persistent debates in municipal water and wastewater treatment plant design centers on the selection of isolation and flow control gates. For decades, engineers have grappled with the choice between traditional heavy-duty cast iron sluice gates and modern fabricated stainless steel slide gates. This decision often crystallizes into a comparison of […]
Page Type: Technical Facility Profile Target Audience: Civil Engineers, Plant Operators, Regulatory Compliance Officers, Municipal Planners Last Updated: May 2024 FACILITY BASIC INFORMATION Plant Name: R.M. Clayton Water Reclamation Center Location: 2440 Bolton Road NW, Atlanta, Fulton County, Georgia Operating Authority: City of Atlanta Department of Watershed Management (DWM) Design Capacity: 122 MGD (Average Daily […]
The authoritative technical resource for the Moccasin Bend facility operations, engineering, and compliance. FACILITY BASIC INFORMATION Plant Name: Moccasin Bend Wastewater Treatment Plant (MBWWTP) Location: 455 Moccasin Bend Road, Chattanooga, Hamilton County, Tennessee Operating Authority: City of Chattanooga, Waste Resources Division Design Capacity: 140 MGD (Hydraulic); ~78 MGD (Secondary Biological) Current Average Flow: ~60-70 MGD […]
The authoritative technical resource for the Mason Farm facility. FACILITY BASIC INFORMATION Plant Name: Mason Farm Wastewater Treatment Plant (WWTP) Location: 170 Old Mason Farm Road, Chapel Hill, Orange County, North Carolina Operating Authority: Orange Water and Sewer Authority (OWASA) Design Capacity: 14.5 MGD (Million Gallons per Day) Current Average Flow: ~7.5 – 8.5 MGD […]
The North Durham Water Reclamation Facility (NDWRF) serves as a critical infrastructure asset for the City of Durham, North Carolina, operating within one of the most environmentally sensitive watersheds in the state. With a permitted design capacity of 20 million gallons per day (MGD), the facility provides wastewater treatment for residential, commercial, and industrial users […]
Technical Note: The facility commonly referred to in the context of the Agua Fria River discharge and operated by the City of Phoenix is officially designated as the 91st Avenue Multi-Cities Wastewater Treatment Plant. It discharges into the Salt River immediately upstream of the Agua Fria River confluence via the Tres Rios Wetlands. This article […]
INTRODUCTION In the realm of anaerobic digestion and cogeneration, the protection of downstream assets—whether internal combustion engines (ICE), boilers, or renewable natural gas (RNG) membranes—is paramount. Engineers often face a critical disconnect: the anaerobic digester produces valuable fuel, but that fuel is laden with hydrogen sulfide (H2S), siloxanes, and moisture that can destroy capital equipment […]