Category: Blog

Introduction One of the most dangerous misconceptions in hydraulic engineering is the attempt to apply centrifugal pump logic to positive displacement equipment. Engineers trained to identify the Best Efficiency Point (BEP), check for runout, and evaluate shutoff head on a standard curve often find themselves disoriented when presented with a peristaltic (hose) pump performance chart. […]

Trickling Filter Systems: Traditional and Effective Wastewater Treatment Article Overview Article Type: Informational Primary Goal: Explain how trickling filter treatment works, when and why to specify it in modern wastewater treatment trains, provide actionable design and operational guidance, and show modernization and retrofit options for municipalities and plant engineers Who is the reader: Municipal utilities, […]

Introduction In municipal and industrial wastewater treatment, the precision of chemical dosing is directly linked to process compliance, yet the longevity of the dosing equipment is often compromised by material mismatching. A common point of failure in chemical feed systems is not the mechanical drive mechanism, but the degradation of wetted parts due to unforeseen […]

Introduction to PC Pump Intake Hydraulics One of the most persistent and expensive failure modes in municipal wastewater treatment plants involves the premature destruction of progressive cavity (PC) pump stators. While often blamed on “bad rubber” or manufacturing defects, a significant percentage of these failures are actually hydraulic issues rooted in the civil and mechanical […]

Introduction One of the most persistent misconceptions in municipal wastewater engineering is that positive displacement (PD) pumps are immune to the hydraulic sensitivities that plague centrifugal systems. While it is true that double disc pumps (DDP) are robust, self-priming, and capable of handling high solids, they remain subject to the fundamental laws of fluid mechanics. […]

INTRODUCTION A frequent failure mode in municipal water and industrial wastewater applications is not the catastrophic burst of a casing, but the silent, cumulative degradation of insulation and mechanical seals due to thermal stress. Engineers often prescribe Variable Frequency Drives (VFDs) to improve energy efficiency, assuming that slowing a pump down inherently reduces stress on […]

Introduction to Submersible Pump Metallurgy One of the most persistent and costly challenges in modern wastewater management is the premature degradation of submersible pumping equipment due to shifting influent chemistry. As water conservation efforts reduce flow rates, wastewater becomes more concentrated. Simultaneously, longer retention times in force mains and collection basins accelerate septicization, leading to […]

Introduction One of the most persistent and costly failures in municipal wastewater collection systems is not the mechanical failure of the pump itself, but the failure of the intake hydraulics. Engineers frequently specify high-efficiency, robust pumping equipment, only to place it into a geometry that guarantees reduced lifespan. A significant percentage of premature bearing failures, […]

Introduction Municipal engineers frequently underestimate the complexity of chemical injection at remote lift stations. While the primary sewage pumps receive the bulk of the design attention, the auxiliary chemical feed systems are often the critical defense against the wastewater industry’s most pervasive enemies: hydrogen sulfide ($H_2S$) corrosion, noxious odors, and Fat, Oil, and Grease (FOG) […]

Introduction Peristaltic pumps (often referred to as hose pumps or tube pumps) are frequently selected for their ability to handle aggressive chemicals, viscous sludge, and shear-sensitive fluids in water and wastewater treatment. However, despite their mechanically simple design—typically involving a rotor compressing a hose—they present a unique set of operational challenges. A surprising industry statistic […]