Tag: Valve Selection

Feb 02
Krohne vs Hach Anti-Cavitation Equipment: Comparison & Best Fit

Introduction Cavitation remains one of the most destructive forces in municipal and industrial fluid handling, capable of destroying impellers, ruining mechanical seals, and fracturing piping within weeks of operation. A surprising industry statistic suggests that nearly 30% of centrifugal pumps in wastewater applications operate outside their Preferred Operating Region (POR), leading to micro-cavitation that often […]

Jan 11
Mueller vs Val-Matic Butterfly Valves Equipment: Comparison & Best Fit

Introduction In municipal water distribution and treatment plant design, the butterfly valve is often treated as a commodity specification—a “set and forget” component. However, statistical data from utility asset management plans suggests that valve failure during critical isolation events (such as main breaks) occurs in approximately 15-20% of aged assets. The cost of a seized […]

Jan 11
Singer Valve vs AVK Ball Valves Equipment: Comparison & Best Fit

Introduction In municipal water distribution and industrial fluid handling, the “valve selection paradox” is a frequent challenge for consulting engineers: the most expensive valve upfront is often the cheapest over 20 years, yet the wrong hydraulic application can destroy even the highest-quality equipment in weeks. A surprising statistic from hydraulic efficiency studies suggests that up […]

Jan 06
Henry Pratt vs Val-Matic for Check Valves: Pros/Cons & Best-Fit Applications

1. INTRODUCTION The sound of a check valve slamming shut—resembling a sledgehammer striking the pipe—is more than a nuisance; it is an audible indicator of kinetic energy rapidly converting to pressure energy, potentially exceeding the structural limits of the piping system. For municipal and industrial engineers, the selection of check valves is the primary line […]

Jan 05
Top 10 Valves – Service Manufacturers for Water and Wastewater

Introduction In municipal water and wastewater treatment infrastructure, valves act as the critical control points for hydraulic stability, process isolation, and flow regulation. A surprising statistic in utility asset management reveals that while valves often constitute less than 10% of a plant’s capital cost, they account for upwards of 25% of the maintenance budget over […]

Oct 04
Valves Used In Water Treatment Plant

Valves Used in Water Treatment Plants: An In-Depth Analysis   Water is a precious resource, and safe, clean water is vital for both human health and ecological balance. Water treatment plants are essential in ensuring the water supply is suitable for consumption by humans, animals, and plants. At the heart of these facilities are valves […]